We all know that industrial touch monitors are used in industry, and their performance is more stable than that of general commercial touch displays. To determine how stable it is, what tests will the manufacturer pass to judge whether the touch monitor is qualified before it is put into use? Top One Tech would like to share with you that a qualified industrial touch monitor needs to pass the following main tests

1. Standardized production

In the process of industrial touch monitor installation production line, it is necessary to strictly control every link of production. This requires touch monitor manufacturers to have standardized production workshops in order to strictly control the production process.

2. IP65 industrial grade dust-proof and waterproof test

Industrial touch monitors are mostly used in industrial and outdoor dusty and watery environments, which require products to be dust-proof and waterproof. Therefore, the finished product needs to pass the industrial-grade IP65 waterproof and waterproof test to ensure the use of special application scenarios.

3. Wide temperature operation test

Because the industrial touch monitor will be used in harsh environments such as high and low temperature, dust, water, and oil stains, after the product has passed the test of controllable high temperature, constant temperature and humidity, its performance is more stable in harsh environments.

4. Anti-static test

By checking the electrostatic test of 4KV contacting the interface end one by one, to ensure whether each interface end can be powered on, so as to ensure the normal operation of the whole product.

5. Vibration test, horizontal drop test

A qualified industrial touch monitor will also undergo simulated automobile and ship vibration and drop tests, which can not only avoid product damage caused by collision during transportation, but also prevent product damage caused by falling during use.

6. Power consumption test

Finally, qualified industrial touch monitors will also undergo a 48-hour aging test. In the aging room, all products will undergo continuous display testing for 48 hours after starting up, and real-time data recording will be performed to ensure that each finished product meets the qualified use standard, and to achieve the purpose of reducing the production defect rate.

After a series of tests, a complete industrial touch display is truly complete. Many manufacturers reduce some of the tests in order to pursue efficiency and cost, which is not good. We cannot blindly pursue efficiency and reduce costs. Each touch monitor from Top One Tech is reasonably priced, stands the test of quality, and has the best price/performance ratio among many touch monitor suppliers. Itdeserves your consideration.